12345678910111213141516171819202122232425262728293031323334 |
- alpaca_isp Command-Line Tool
- ============================
-
- ::
-
- usage: alpaca_isp [-h] [-b BAUDRATE] [-c CLOCK_KHZ] [-t TIMEOUT] [-e]
- [--no-start] [--try-sync TRY_SYNC] [-n] [-r]
- file [file ...] tty
-
- Flash an LPC microcontroller
-
- positional arguments:
- file Intel HEX file to flash to the microcontroller
- tty the tty to which the microcontroller is attached
-
- optional arguments:
- -h, --help show this help message and exit
- -b BAUDRATE, --baudrate BAUDRATE
- baud rate used for communication (default: 115200)
- -c CLOCK_KHZ, --clock-khz CLOCK_KHZ
- microcontroller's clock frequency in kHz (default:
- 12000)
- -t TIMEOUT, --timeout TIMEOUT
- timeout for reading data from the microcontroller in
- seconds (default: 0.1)
- -e, --erase erase all the microcontroller's flash before flashing
- --no-start do not start the microcontroller after flashing
- --try-sync TRY_SYNC maximum number of tries to synchronize with the
- microcontroller
- -n, --control control RS232 lines to enter ISP mode (/RST = DTR,
- /ISP = RTS)
- -r, --verify verify that the data were written correctly after
- flashing
|