Capture the display of a Rigol DS1000Z series oscilloscope by LAN using LXI SCPI commands

RoGeorge 58e3bbc377 Ported for Linux - tested on Debian 7.7.0 Python 2.7.3 and PIL were already included in Debian		9年前
DS1104Z_DS1ZA164658712_2015-05-10_23.14.43.png	Add capture example	9年前
DS1104Z_DS1ZA164658712_2015-05-10_23.40.57.png	Add capture example	9年前
LICENSE	Initial commit	9年前
OscScreenGrabLAN.py	Ported for Linux - tested on Debian 7.7.0 Python 2.7.3 and PIL were already included in Debian	9年前
README.md	Typo	9年前
telnetlib_receive_all.py	Create telnetlib_receive_all.py	9年前

DS1054Z_screen_capture

‘OscScreenGrabLAN.py’ is a Python script that captures whatever is displayed on the screen of a Rigol DS1000Z series oscilloscope. To achieve this, SCPI (Standard Commands for Programmable Instruments) are sent from the computer to the oscilloscope, using the LXI (LAN-based eXtensions for Instrumentation) protocol over a Telnet connection. The computer and the oscilloscope are connected together by a LAN (Local Area Network). No USB (Universal Serial Bus), no VISA (Virtual Instrument Software Architecture), no IVI (Interchangeable Virtual Instrument) and no Rigol drivers are required. Python 2 is required. Python 3 is not supported.

Tested only with Windows 7, Python 2.7.9 and Rigol DS1104Z (a fully upgraded DS1054Z oscilloscope).

Usage:

Install Python 2.7.9 from https://www.python.org/downloads. Install “Python Imaging Library 1.1.7 for Python 2.7” from http://www.pythonware.com/products/pil. Run the PIL (Python Imaging Library) installer as Administrator, otherwise it won’t be installed properly. Connect together the computer and the oscilloscope (by LAN). In order to capture an image from the oscilloscope display and save it to the computer disk, open a Command Prompt as Administrator and run “OscScreenGrabLAN.py”.

Example:

C:\Python27\python.exe OscScreenGrabLAN.py

README.md

DS1054Z_screen_capture

Usage: