clara
/
ds1000z-screen-capture
Sledovat 1
Oblíbit 0
Rozštěpit 0
Zdrojový kód Úkoly 0 Požadavky na natažení 0 Vydání 0 Wiki Activity
Capture the display of a Rigol DS1000Z series oscilloscope by LAN using LXI SCPI commands
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
11 Revize
1 Větev
Strom: 64116cac99
Větve Značky
${ item.name }
Create branch ${ searchTerm }
from '64116cac99'
${ noResults }
ds1000z-screen-capture
RoGeorge 64116cac99 Typo touch před 9 roky
DS1104Z_DS1ZA164658712_2015-05-10_23.14.43.png Add capture example před 9 roky
DS1104Z_DS1ZA164658712_2015-05-10_23.40.57.png Add capture example před 9 roky
LICENSE Initial commit před 9 roky
OscScreenGrabLAN.py Remove dead commented code před 9 roky
README.md Typo touch před 9 roky
telnetlib_receive_all.py Create telnetlib_receive_all.py před 9 roky

README.md

DS1054Z_screen_capture

‘OscScreenGrabLAN.py’ is a Python script that captures whatever is displayed on the screen of a Rigol DS1000Z series oscilloscope. To achieve this, SCPI (Standard Commands for Programmable Instruments) are sent from the computer to the oscilloscope, using the LXI (LAN-based eXtensions for Instrumentation) protocol over a Telnet connexion. The computer and the oscilloscope are connected together by a LAN (Local Area Network). No USB (Universal Serial Bus), no VISA (Virtual Instrument Software Architecture), no IVI (Interchangeable Virtual Instrument) and no Rigol drivers are required. Python 2 is required. Python 3 is not supported.

Tested only with Windows 7, Python 2.7.9 and Rigol DS1104Z (a fully upgraded DS1054Z oscilloscope).

Usage:

Install Python 2.7.9 from https://www.python.org/downloads. Install “Python Imaging Library 1.1.7 for Python 2.7” from http://www.pythonware.com/products/pil. Run the PIL (Python Imaging Library) installer as Administrator, otherwise it won’t be installed properly. Connect together the computer and the oscilloscope (by LAN). In order to capture an image from the oscilloscope display and save it to the computer disk, open a Command Prompt as Administrator and run “OscScreenGrabLAN.py”.

Example:

C:\Python27\python.exe OscScreenGrabLAN.py