Capture the display of a Rigol DS1000Z series oscilloscope by LAN using LXI SCPI commands

RoGeorge d576eabceb Add PIL installation instructions		9 年之前
DS1104Z_DS1ZA164658712_2015-05-10_23.14.43.png	Add capture example	9 年之前
DS1104Z_DS1ZA164658712_2015-05-10_23.40.57.png	Add capture example	9 年之前
LICENSE	Initial commit	9 年之前
OscScreenGrabLAN.py	Create OscScreenGrabLAN.py	9 年之前
README.md	Add PIL installation instructions	9 年之前
telnetlib_receive_all.py	Create telnetlib_receive_all.py	9 年之前

DS1054Z_screen_capture

‘OscScreenGrabLAN.py’ is a Python script that captures whatever is displayed on the screen of a Rigol DS1000Z series oscilloscope. To achieve this, SCPI (Standard Commands for Programmable Instruments) are sent from the computer to the oscilloscope, using the LXI (LAN-based eXtensions for Instrumentation) protocol over a Telnet connexion. The computer and the oscilloscope are connected together by a LAN (Local Area Network). No USB (Universal Serial Bus), no VISA (Virtual Instrument Software Architecture), no IVI (Interchangeable Virtual Instrument) and no Rigol drivers are required. Python 2 is required. Python 3 is not supported.

Tested only with Windows 7, Python 2.7.9 and Rigol DS1104Z (a fully upgraded DS1054Z oscilloscope).

Usage:

Install Python 2.7.9 from https://www.python.org/downloads . Install ‘Python Imaging Library 1.1.7 for Python 2.7’ from http://www.pythonware.com/products/pil . Run the PIL (Python Imaging Library) installer as Administrator, otherwise it won’t be installed properly. Connect together the computer and the oscilloscope (by LAN). In order to capture an image from the oscilloscope display and save it to the computer disk, open a Command Prompt as Administrator and run ‘OscScreenGrabLAN.py’.

Example:

C:\Python27\python.exe OscScreenGrabLAN.py

README.md

DS1054Z_screen_capture

Usage: