Capture the display of a Rigol DS1000Z series oscilloscope by LAN using LXI SCPI commands

RoGeorge f46752f2e6 Add PIL installation instructions		9 년 전
DS1104Z_DS1ZA164658712_2015-05-10_23.14.43.png	Add capture example	9 년 전
DS1104Z_DS1ZA164658712_2015-05-10_23.40.57.png	Add capture example	9 년 전
LICENSE	Initial commit	9 년 전
OscScreenGrabLAN.py	Create OscScreenGrabLAN.py	9 년 전
README.md	Add PIL installation instructions	9 년 전
telnetlib_receive_all.py	Create telnetlib_receive_all.py	9 년 전

DS1054Z_screen_capture

‘OscScreenGrabLAN.py’ is a Python script that captures whatever is displayed on the screen of a Rigol DS1000Z series oscilloscope. To achieve this, SCPI (Standard Commands for Programmable Instruments) are sent from the computer to the oscilloscope, using the LXI (LAN-based eXtensions for Instrumentation) protocol over a Telnet connexion. The computer and the oscilloscope are connected together by a LAN (Local Area Network). No USB (Universal Serial Bus), no VISA (Virtual Instrument Software Architecture), no IVI (Interchangeable Virtual Instrument) and no Rigol drivers are required. Python 2 is required. Python 3 is not supported.

Tested only with Windows 7, Python 2.7.9 and Rigol DS1104Z (a fully upgraded DS1054Z oscilloscope).

Usage:

Install Python 2.7.9 from ‘https://www.python.org/downloads’. Install ‘Python Imaging Library 1.1.7 for Python 2.7’ from ‘http://www.pythonware.com/products/pil’. Run the PIL (Python Imaging Library) installer as Administrator, otherwise it won’t work. Connect together the computer and the oscilloscope (by LAN). In order to capture an image from the oscilloscope display and save it to the computer disk, open a Command Prompt as Administrator and run ‘OscScreenGrabLAN.py’.

Example:

C:\Python27\python.exe OscScreenGrabLAN.py

README.md

DS1054Z_screen_capture

Usage: