Explorar el Código

Added GUI info to README, reformatted links

Now that there's a decent GUI, we can at least mention that it exists in
the README.  It's good to make people aware of their options, you know?

Also, I got tired of the inline URLs, so I changed the links to be of
the footnote type.  It's much nicer looking e.g. in the list of firmware
flashing programs.
Clara Hobbs hace 7 años
padre
commit
64b6b07929
Se han modificado 1 ficheros con 28 adiciones y 12 borrados
  1. 28
    12
      README.md

+ 28
- 12
README.md Ver fichero

@@ -1,15 +1,16 @@
1 1
 # PD Buddy firmware
2 2
 
3 3
 This is the firmware for the PD Buddy project.  Currently, this specifically
4
-means the PD Buddy Sink.  The firmware is currently under heavy development,
4
+means the [PD Buddy Sink][].  The firmware is currently under heavy development,
5 5
 but is partially functional.
6 6
 
7
+[PD Buddy Sink]: https://git.clayhobbs.com/clay/pd-buddy-sink
8
+
7 9
 ## Prerequisites
8 10
 
9 11
 To compile the firmware, you must first install the [GNU ARM Embedded
10
-Toolchain](https://launchpad.net/gcc-arm-embedded).  Details of its
11
-installation is beyond the scope of this README.  Once the toolchain is
12
-installed, clone this repository with:
12
+Toolchain][toolchain].  Details of its installation is beyond the scope of this
13
+README.  Once the toolchain is installed, clone this repository with:
13 14
 
14 15
     $ git clone --recursive http://git.clayhobbs.com/clay/pd-buddy-firmware.git
15 16
 
@@ -17,9 +18,13 @@ This will give you a complete copy of the repository, including the ChibiOS
17 18
 submodule.
18 19
 
19 20
 You will also need to install some program to flash the firmware.  The simplest
20
-option is [dfu-util](http://dfu-util.sourceforge.net/), as it requires no extra
21
-hardware.  If you prefer to use SWD, you could also use
22
-[stlink](https://github.com/texane/stlink) or [OpenOCD](http://openocd.org/).
21
+option is [dfu-util][], as it requires no extra hardware.  If you prefer to use
22
+SWD, you could also use [stlink][] or [OpenOCD][].
23
+
24
+[toolchain]: https://launchpad.net/gcc-arm-embedded
25
+[dfu-util]: http://dfu-util.sourceforge.net/
26
+[stlink]: https://github.com/texane/stlink
27
+[OpenOCD]: http://openocd.org/
23 28
 
24 29
 ## Compiling
25 30
 
@@ -62,15 +67,15 @@ OpenOCD can also be used to flash the firmware.  For example:
62 67
 After first flashing the PD Buddy Sink, the device has no configuration.  To
63 68
 configure it, plug it into your computer while holding the "Setup" button.  The
64 69
 LED should blink once per second to indicate that the device is in
65
-configuration mode.  The Sink provides a virtual serial port for editing its
66
-configuration.
70
+configuration mode.  There are then two ways to configure the Sink: a serial
71
+terminal, or the configuration GUI.
67 72
 
68 73
 ### Configuration with the Serial Terminal
69 74
 
70 75
 Connect to the PD Buddy Sink with your favorite serial console program, such as
71
-GNU Screen, Minicom, or PuTTY.  Press Enter, and you should be greeted with a
72
-`PDBS)` prompt.  The `help` command gives brief summaries of each of the
73
-available commands.
76
+[GNU Screen][], [Minicom][], or [PuTTY][].  Press Enter, and you should be
77
+greeted with a `PDBS)` prompt.  The `help` command gives brief summaries of
78
+each of the available commands.
74 79
 
75 80
 To configure the PD Buddy Sink to request 2.25 A at 20 V, run the following
76 81
 commands:
@@ -82,6 +87,17 @@ commands:
82 87
 When `write` is run, the chosen settings are written to flash.  You can then
83 88
 simply disconnect the Sink from your computer.
84 89
 
90
+[GNU Screen]: https://www.gnu.org/software/screen/
91
+[Minicom]: https://alioth.debian.org/projects/minicom
92
+[PuTTY]: http://www.chiark.greenend.org.uk/~sgtatham/putty/
93
+
94
+### Configuration with the GUI
95
+
96
+The Sink can also be configured by the [PD Buddy Configuration][pd-buddy-gtk]
97
+GUI.  For more information, see that repository's README.
98
+
99
+[pd-buddy-gtk]: https://git.clayhobbs.com/clay/pd-buddy-gtk
100
+
85 101
 ### Using the configured PD Buddy Sink
86 102
 
87 103
 Once the Sink has been configured, just plug it into your USB PD power supply.

Loading…
Cancelar
Guardar