PD Buddy Sink Firmware
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.

Makefile 6.2KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229
  1. ##############################################################################
  2. # Build global options
  3. # NOTE: Can be overridden externally.
  4. #
  5. # Compiler options here.
  6. ifeq ($(USE_OPT),)
  7. USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
  8. endif
  9. # C specific options here (added to USE_OPT).
  10. ifeq ($(USE_COPT),)
  11. USE_COPT = -std=gnu11
  12. endif
  13. # C++ specific options here (added to USE_OPT).
  14. ifeq ($(USE_CPPOPT),)
  15. USE_CPPOPT = -fno-rtti
  16. endif
  17. # Enable this if you want the linker to remove unused code and data
  18. ifeq ($(USE_LINK_GC),)
  19. USE_LINK_GC = yes
  20. endif
  21. # Linker extra options here.
  22. ifeq ($(USE_LDOPT),)
  23. USE_LDOPT =
  24. endif
  25. # Enable this if you want link time optimizations (LTO)
  26. ifeq ($(USE_LTO),)
  27. USE_LTO = no
  28. endif
  29. # If enabled, this option allows to compile the application in THUMB mode.
  30. ifeq ($(USE_THUMB),)
  31. USE_THUMB = yes
  32. endif
  33. # Enable this if you want to see the full log while compiling.
  34. ifeq ($(USE_VERBOSE_COMPILE),)
  35. USE_VERBOSE_COMPILE = no
  36. endif
  37. # If enabled, this option makes the build process faster by not compiling
  38. # modules not used in the current configuration.
  39. ifeq ($(USE_SMART_BUILD),)
  40. USE_SMART_BUILD = yes
  41. endif
  42. #
  43. # Build global options
  44. ##############################################################################
  45. ##############################################################################
  46. # Architecture or project specific options
  47. #
  48. # Stack size to be allocated to the Cortex-M process stack. This stack is
  49. # the stack used by the main() thread.
  50. ifeq ($(USE_PROCESS_STACKSIZE),)
  51. USE_PROCESS_STACKSIZE = 0x200
  52. endif
  53. # Stack size to the allocated to the Cortex-M main/exceptions stack. This
  54. # stack is used for processing interrupts and exceptions.
  55. ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
  56. USE_EXCEPTIONS_STACKSIZE = 0x400
  57. endif
  58. # Enables the use of FPU (no, softfp, hard).
  59. ifeq ($(USE_FPU),)
  60. USE_FPU = no
  61. endif
  62. #
  63. # Architecture or project specific options
  64. ##############################################################################
  65. ##############################################################################
  66. # Project, sources and paths
  67. #
  68. # Define project name here
  69. PROJECT = pd-buddy-firmware
  70. # Imported source files and paths
  71. CHIBIOS = ChibiOS
  72. PDBLIB = lib
  73. # Startup files.
  74. include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
  75. # HAL-OSAL files (optional).
  76. include $(CHIBIOS)/os/hal/hal.mk
  77. include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
  78. include $(CHIBIOS)/../boards/PD_BUDDY_SINK/board.mk
  79. include $(CHIBIOS)/os/hal/osal/rt/osal.mk
  80. # RTOS files (optional).
  81. include $(CHIBIOS)/os/rt/rt.mk
  82. include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
  83. # Other files (optional).
  84. include $(CHIBIOS)/test/rt/test.mk
  85. include $(PDBLIB)/pd-buddy.mk
  86. # Define linker script file here
  87. LDSCRIPT=$(CHIBIOS)/../ld/STM32F072x8.ld
  88. # C sources that can be compiled in ARM or THUMB mode depending on the global
  89. # setting.
  90. CSRC = $(STARTUPSRC) \
  91. $(KERNSRC) \
  92. $(PORTSRC) \
  93. $(OSALSRC) \
  94. $(HALSRC) \
  95. $(PLATFORMSRC) \
  96. $(BOARDSRC) \
  97. $(TESTSRC) \
  98. $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
  99. $(PDBSRC) \
  100. $(wildcard src/*.c)
  101. # C++ sources that can be compiled in ARM or THUMB mode depending on the global
  102. # setting.
  103. CPPSRC =
  104. # C sources to be compiled in ARM mode regardless of the global setting.
  105. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
  106. # option that results in lower performance and larger code size.
  107. ACSRC =
  108. # C++ sources to be compiled in ARM mode regardless of the global setting.
  109. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
  110. # option that results in lower performance and larger code size.
  111. ACPPSRC =
  112. # C sources to be compiled in THUMB mode regardless of the global setting.
  113. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
  114. # option that results in lower performance and larger code size.
  115. TCSRC =
  116. # C sources to be compiled in THUMB mode regardless of the global setting.
  117. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
  118. # option that results in lower performance and larger code size.
  119. TCPPSRC =
  120. # List ASM source files here
  121. ASMSRC =
  122. ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
  123. INCDIR = $(CHIBIOS)/os/license \
  124. $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
  125. $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
  126. $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various \
  127. $(PDBINC) \
  128. config
  129. #
  130. # Project, sources and paths
  131. ##############################################################################
  132. ##############################################################################
  133. # Compiler settings
  134. #
  135. MCU = cortex-m0
  136. #TRGT = arm-elf-
  137. TRGT = arm-none-eabi-
  138. CC = $(TRGT)gcc
  139. CPPC = $(TRGT)g++
  140. # Enable loading with g++ only if you need C++ runtime support.
  141. # NOTE: You can use C++ even without C++ support if you are careful. C++
  142. # runtime support makes code size explode.
  143. LD = $(TRGT)gcc
  144. #LD = $(TRGT)g++
  145. CP = $(TRGT)objcopy
  146. AS = $(TRGT)gcc -x assembler-with-cpp
  147. AR = $(TRGT)ar
  148. OD = $(TRGT)objdump
  149. SZ = $(TRGT)size
  150. HEX = $(CP) -O ihex
  151. BIN = $(CP) -O binary
  152. # ARM-specific options here
  153. AOPT =
  154. # THUMB-specific options here
  155. TOPT = -mthumb -DTHUMB
  156. # Define C warning options here
  157. CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
  158. # Define C++ warning options here
  159. CPPWARN = -Wall -Wextra -Wundef
  160. #
  161. # Compiler settings
  162. ##############################################################################
  163. ##############################################################################
  164. # Start of user section
  165. #
  166. # List all user C define here, like -D_DEBUG=1
  167. UDEFS = -DPDBS_CONFIG_BASE=0x0800F800
  168. # Define ASM defines here
  169. UADEFS =
  170. # List all user directories here
  171. UINCDIR =
  172. # List the user directory to look for the libraries here
  173. ULIBDIR =
  174. # List all user libraries here
  175. ULIBS =
  176. #
  177. # End of user defines
  178. ##############################################################################
  179. RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
  180. include $(RULESPATH)/rules.mk
  181. # Special rules follow
  182. flash-openocd-stlink: $(BUILDDIR)/$(PROJECT).elf
  183. openocd -f interface/stlink-v2.cfg -c "transport select hla_swd" -f target/stm32f0x.cfg -c "program $(BUILDDIR)/$(PROJECT).elf verify reset exit"