pd-buddy/pd-buddy-firmware: PD Buddy Sink Firmware

PD Buddy Sink Firmware

Historik

Clara Hobbs 87901c0091 Accurately set DPM minimum current I took an accurate reading of the current consumed by the PD Buddy Sink in various states, and found that the lowest current I could safely set as the amount it requests when the output is turned off was 30 mA. I therefore changed it to request this lower current to avoid asking for more than we need. (cherry picked from commit 88766783de)		6 år sedan
..
config.c	Rename the firmware in the license header	6 år sedan
config.h	Update to ChibiOS 17.6.x	6 år sedan
device_policy_manager.c	Accurately set DPM minimum current	6 år sedan
device_policy_manager.h	Rename the firmware in the license header	6 år sedan
led.c	Rename the firmware in the license header	6 år sedan
led.h	Rename the firmware in the license header	6 år sedan
main.c	Make the INT_N line configurable	6 år sedan
priorities.h	Rename the firmware in the license header	6 år sedan
shell.c	Print the unchunked_ext_msg bit in get_source_cap	6 år sedan
shell.h	Rename the firmware in the license header	6 år sedan
stm32f072_bootloader.c	Rename the firmware in the license header	6 år sedan
stm32f072_bootloader.h	Rename the firmware in the license header	6 år sedan
usbcfg.c	Update version number to 1.2.0	6 år sedan
usbcfg.h	Rename the firmware in the license header	6 år sedan