pd-buddy
/
pd-buddy-gtk
Bevaka 1
Stjärnmärk 0
Förgrening 0
Kod Ärenden 0 Pull-förfrågningar 0 Släpp 0 Wiki Aktiviteter
GTK+ GUI for configuring PD Buddy Sink devices
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.
20 Incheckningar
2 Grenar
Träd: 2fedef819f
Grenar Taggar
${ item.name }
Skapa branchen ${ searchTerm }
från '2fedef819f'
${ noResults }
pd-buddy-gtk
Clara Hobbs 2fedef819f Use SinkConfig objects for Save button visibility 7 år sedan
data Use USB manufacturer and product strings for names 7 år sedan
.gitignore Added proof-of-concept GUI 7 år sedan
LICENSE Added license 7 år sedan
README.md Use pd-buddy-python instead of pySerial directly 7 år sedan
pd-buddy-gtk.py Use SinkConfig objects for Save button visibility 7 år sedan

README.md

PD Buddy Configuration

PD Buddy Configuration is a GTK+ GUI for configuring PD Buddy Sink devices.

Dependencies

PD Buddy Configuration is developed with these versions of its dependencies, but older versions may work.

  • GTK+ 3.22
  • Python 3.6
  • python-gobject 3.22
  • pd-buddy-python 0.1

Usage

Plug your PD Buddy Sink(s) into your computer while holding the Setup button. Start PD Buddy Configuration with:

$ ./pd-buddy-gtk.py

You will be greeted with a list of connected PD Buddy devices. If there is more than one connected, you can identify them by clicking the light bulb button in each list entry (the selected device’s LED will blink rapidly for two seconds).

Click one of the list items to configure the device. Select the desired voltage and current, then click Save. If you want to configure other devices, click the Back arrow to return to the list. After the settings have been saved, the devices can be safely disconnected at any time.