pd-buddy
/
pd-buddy-gtk
Vērot 1
Pievienot zvaigznīti 0
Atdalīts 0
Kods Problēmas 0 Izmaiņu pieprasījumi 0 Laidieni 0 Vikivietne Aktivitāte
GTK+ GUI for configuring PD Buddy Sink devices
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.
12 Revīzijas
2 Atzari
Koks: 73bc4ce454
Atzari Tagi
${ item.name }
Izveidot atzaru ${ searchTerm }
no '73bc4ce454'
${ noResults }
pd-buddy-gtk
Clara Hobbs 73bc4ce454 Error handling when sending commands 7 gadus atpakaļ
data Reorganized device list code 7 gadus atpakaļ
.gitignore Added proof-of-concept GUI 7 gadus atpakaļ
LICENSE Added license 7 gadus atpakaļ
README.md Added a description of dependencies and usage 7 gadus atpakaļ
pd-buddy-gtk.py Error handling when sending commands 7 gadus atpakaļ

README.md

PD Buddy Configuration

PD Buddy Configuration is a GTK+ GUI for configuring PD Buddy Sink devices.

Dependencies

PD Buddy Configuration is developed with these versions of its dependencies, but older versions may work.

  • GTK+ 3.22
  • Python 3.6
  • python-gobject 3.22
  • pyserial 3.2

Usage

Plug your PD Buddy Sink(s) into your computer while holding the Setup button. Start PD Buddy Configuration with:

$ ./pd-buddy-gtk.py

You will be greeted with a list of connected PD Buddy devices. If there is more than one connected, you can identify them by clicking the light bulb button in each list entry (the selected device’s LED will blink rapidly for two seconds).

Click one of the list items to configure the device. Select the desired voltage and current, then click Save. If you want to configure other devices, click the Back arrow to return to the list. After the settings have been saved, the devices can be safely disconnected at any time.