GTK+ GUI for configuring PD Buddy Sink devices
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Clara Hobbs dac9d5ddff Add interface for setting voltage range 6 yıl önce
data Add interface for setting voltage range 6 yıl önce
.gitignore Added proof-of-concept GUI 7 yıl önce
LICENSE Added license 7 yıl önce
README.md Update for pd-buddy-python 0.5.0 6 yıl önce
pd-buddy-gtk.py Add interface for setting voltage range 6 yıl önce

README.md

PD Buddy Configuration

PD Buddy Configuration is a GTK+ GUI for configuring PD Buddy Sink devices.

Dependencies

PD Buddy Configuration is developed with these versions of its dependencies, but older versions may work.

  • GTK+ 3.22
  • Python 3.6
  • python-gobject 3.22
  • pd-buddy-python 0.5.0

Usage

Plug your PD Buddy Sink(s) into your computer while holding the Setup button. Start PD Buddy Configuration with:

$ ./pd-buddy-gtk.py

You will be greeted with a list of connected PD Buddy devices. If there is more than one connected, you can identify them by clicking the light bulb button in each list entry (the selected device’s LED will blink rapidly for two seconds).

Click one of the list items to configure the device. Select the desired voltage and current, then click Save. If you want to configure other devices, click the Back arrow to return to the list. After the settings have been saved, the devices can be safely disconnected at any time.