Ver código fonte

Added clearance to the programming jig

It was too tight for MacroFab's routing tolerances before, so some
boards didn't fit well.  Now they all fit just fine, making me a happy
camper.
Clara Hobbs 6 anos atrás
pai
commit
711337c311
1 arquivos alterados com 1 adições e 1 exclusões
  1. 1
    1
      programming-jig.scad

+ 1
- 1
programming-jig.scad Ver arquivo

@@ -19,7 +19,7 @@ module mill_max_854_cutout(pins, h, clearance) {
19 19
  * 3D-printed part of a PD Buddy programming jig
20 20
  */
21 21
 module programming_jig(board=sink_1_0, layer_thickness=0.4*mm,
22
-		extrusion_width=0.6*mm, clearance=0.1*mm) {
22
+		extrusion_width=0.6*mm, clearance=0.35*mm) {
23 23
 	/* It would be ridiculous to try to cram enough information into the board
24 24
 	 * objects to properly parameterize this, so the board is only used to set
25 25
 	 * which object we're making. */

Carregando…
Cancelar
Salvar