Bläddra i källkod

Added clearance to the programming jig

It was too tight for MacroFab's routing tolerances before, so some
boards didn't fit well.  Now they all fit just fine, making me a happy
camper.
Clara Hobbs 6 år sedan
förälder
incheckning
711337c311
1 ändrade filer med 1 tillägg och 1 borttagningar
  1. 1
    1
      programming-jig.scad

+ 1
- 1
programming-jig.scad Visa fil

@@ -19,7 +19,7 @@ module mill_max_854_cutout(pins, h, clearance) {
19 19
  * 3D-printed part of a PD Buddy programming jig
20 20
  */
21 21
 module programming_jig(board=sink_1_0, layer_thickness=0.4*mm,
22
-		extrusion_width=0.6*mm, clearance=0.1*mm) {
22
+		extrusion_width=0.6*mm, clearance=0.35*mm) {
23 23
 	/* It would be ridiculous to try to cram enough information into the board
24 24
 	 * objects to properly parameterize this, so the board is only used to set
25 25
 	 * which object we're making. */

Laddar…
Avbryt
Spara