Python library for working with the PD Buddy Sink Serial Console Configuration Interface
Вы не можете выбрать более 25 тем Темы должны начинаться с буквы или цифры, могут содержать дефисы(-) и должны содержать не более 35 символов.
Clara Hobbs 698d9e805c Mention how to check that identify is working 7 лет назад
pdbuddy Documented the parameter to SinkConfig.from_text 7 лет назад
test_pdbuddy Test the Sink class 7 лет назад
.gitignore Initial commit 7 лет назад
LICENSE Added a simple PD Buddy Sink configuration library 7 лет назад
README.rst Mention how to check that identify is working 7 лет назад
setup.py Testing info in README, wider Python compatibility 7 лет назад

README.rst

pd-buddy-python
===============

Python library for working with the PD Buddy Sink Serial Console
Configuration Interface

Features
--------

- Provides a Pythonic interface to the PD Buddy Sink shell commands
- Configuration is represented as a SinkConfig object
- SinkConfig objects can be manipulated locally and written to the
device with one method call

Examples
--------

Open the first PD Buddy Sink device and read its configuration
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

::

>>> import pdbuddy
>>> pdbs = pdbuddy.Sink(list(pdbuddy.Sink.get_devices())[0])
>>> pdbs.get_cfg()
SinkConfig(status=SinkStatus.VALID, flags=SinkFlags.NONE, v=5000, i=3000)
>>> print(pdbs.get_cfg())
status: valid
flags: (none)
v: 5.00 V
i: 3.00 A

Locally manipulate a SinkConfig object
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

::

>>> cfg = pdbs.get_cfg()
>>> cfg.v = 20000
>>> cfg.i = 2250
>>> cfg.flags |= pdbuddy.SinkFlags.GIVEBACK
>>> cfg
SinkConfig(status=SinkStatus.VALID, flags=SinkFlags.GIVEBACK, v=20000, i=2250)

Write the SinkConfig object to flash
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

::

>>> pdbs.set_tmpcfg(cfg)
>>> pdbs.write()
>>> pdbs.get_cfg()
SinkConfig(status=SinkStatus.VALID, flags=SinkFlags.GIVEBACK, v=20000, i=2250)

Requirements
------------

- Python 2.7, >= 3.3
- pySerial >= 3.0
- aenum >= 2.0 (if using Python < 3.6)

Testing
-------

To run the unit tests, run::

$ python setup.py test

This will test the Sink class only if a PD Buddy Sink is plugged in and in
setup mode, so make sure that's the case if you're testing any changes to the
Sink class. Also, make sure the Status LED is blinking quickly when the tests
are run, since that's the only real way to test the ``identify`` command.