PD Buddy Sink schematics and circuit board

Clara Hobbs 204f04011b Changed R10 to 220 Ω It'll make the LED a bit brighter, and it's a more common value.		7 年前
pd-buddy.pretty	4-layer board with smaller components	7 年前
.gitignore	Initial commit	7 年前
LICENSE	Added license (CERN OHL 1.2)	7 年前
README.md	Updated README for v0.3 development	7 年前
fp-lib-table	Added PD-Buddy v0.1 PCB	7 年前
microcontroller.sch	Changed R10 to 220 Ω	7 年前
output.sch	4-layer board with smaller components	7 年前
pd-buddy-sink-cache.lib	4-layer board with smaller components	7 年前
pd-buddy-sink.csv	Rename project files to pd-buddy-sink	7 年前
pd-buddy-sink.kicad_pcb	Changed R10 to 220 Ω	7 年前
pd-buddy-sink.pro	Rename project files to pd-buddy-sink	7 年前
pd-buddy-sink.sch	4-layer board with smaller components	7 年前
pd-buddy.dcm	Added Amphenol 12401610E4#2A	7 年前
pd-buddy.lib	Added Amphenol 12401610E4#2A	7 年前
pd_phy.sch	4-layer board with smaller components	7 年前
usb_type-c.sch	4-layer board with smaller components	7 年前
voltage_regulator.sch	4-layer board with smaller components	7 年前

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 1 oz copper on all layers. 1.6 mm thickness should be fine. Just keep in mind that it isn’t possible to assemble the board with a soldering iron anymore!

The PCB is made with KiCad, so you’ll need that if you want to make any changes. Several PCB fabricators accept KiCad PCB files directly now, but if you intend to order from one that does not, you’ll need KiCad to plot the Gerbers.

README.md

PD Buddy Sink