PD Buddy Sink schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Clara Hobbs 5c7424544c Rename project files to pd-buddy-sink 7 years ago
pd-buddy.pretty Added pasteless footprints 7 years ago
.gitignore Initial commit 7 years ago
LICENSE Added license (CERN OHL 1.2) 7 years ago
README.md Added a note in the README about board specs 7 years ago
fp-lib-table Added PD-Buddy v0.1 PCB 7 years ago
microcontroller.sch Post-release version bump 7 years ago
output.sch Post-release version bump 7 years ago
pd-buddy-sink-cache.lib Rename project files to pd-buddy-sink 7 years ago
pd-buddy-sink.csv Rename project files to pd-buddy-sink 7 years ago
pd-buddy-sink.dcm Rename project files to pd-buddy-sink 7 years ago
pd-buddy-sink.kicad_pcb Rename project files to pd-buddy-sink 7 years ago
pd-buddy-sink.pro Rename project files to pd-buddy-sink 7 years ago
pd-buddy-sink.sch Rename project files to pd-buddy-sink 7 years ago
pd-buddy.lib Corrected BJT connections 7 years ago
pd_phy.sch Post-release version bump 7 years ago
usb_type-c.sch Post-release version bump 7 years ago
voltage_regulator.sch Post-release version bump 7 years ago

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.