PD Buddy Sink schematics and circuit board

Clara Hobbs 629092c5cf Added fiducials to board top		7年前
pd-buddy.pretty	4-layer board with smaller components	7年前
.gitignore	Initial commit	7年前
LICENSE	Added license (CERN OHL 1.2)	7年前
README.md	Updated README for v0.3 development	7年前
fp-lib-table	Added PD-Buddy v0.1 PCB	7年前
microcontroller.sch	4-layer board with smaller components	7年前
output.sch	4-layer board with smaller components	7年前
pd-buddy-sink-cache.lib	4-layer board with smaller components	7年前
pd-buddy-sink.csv	Rename project files to pd-buddy-sink	7年前
pd-buddy-sink.kicad_pcb	Added fiducials to board top	7年前
pd-buddy-sink.pro	Rename project files to pd-buddy-sink	7年前
pd-buddy-sink.sch	4-layer board with smaller components	7年前
pd-buddy.dcm	Added Amphenol 12401610E4#2A	7年前
pd-buddy.lib	Added Amphenol 12401610E4#2A	7年前
pd_phy.sch	4-layer board with smaller components	7年前
usb_type-c.sch	4-layer board with smaller components	7年前
voltage_regulator.sch	4-layer board with smaller components	7年前

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 1 oz copper on all layers. 1.6 mm thickness should be fine. Just keep in mind that it isn’t possible to assemble the board with a soldering iron anymore!

The PCB is made with KiCad, so you’ll need that if you want to make any changes. Several PCB fabricators accept KiCad PCB files directly now, but if you intend to order from one that does not, you’ll need KiCad to plot the Gerbers.

README.md

PD Buddy Sink