PD Buddy Sink schematics and circuit board

Clara Hobbs 6fecfe1ee3 Changed USB connector to SMD version There's now quite a bit of stuff located under the USB connector. A lot of manufacturers mark that area as a keep-out zone, but luckily, Amphenol is not one of them.		7 年前
pd-buddy.pretty	Added Amphenol 12401610E4#2A	7 年前
.gitignore	Initial commit	7 年前
LICENSE	Added license (CERN OHL 1.2)	7 年前
README.md	Added a note in the README about board specs	7 年前
fp-lib-table	Added PD-Buddy v0.1 PCB	7 年前
microcontroller.sch	Added Amphenol 12401610E4#2A	7 年前
output.sch	Added Amphenol 12401610E4#2A	7 年前
pd-buddy-sink-cache.lib	Changed USB connector to SMD version	7 年前
pd-buddy-sink.csv	Rename project files to pd-buddy-sink	7 年前
pd-buddy-sink.kicad_pcb	Changed USB connector to SMD version	7 年前
pd-buddy-sink.pro	Rename project files to pd-buddy-sink	7 年前
pd-buddy-sink.sch	Added Amphenol 12401610E4#2A	7 年前
pd-buddy.dcm	Added Amphenol 12401610E4#2A	7 年前
pd-buddy.lib	Added Amphenol 12401610E4#2A	7 年前
pd_phy.sch	Added Amphenol 12401610E4#2A	7 年前
usb_type-c.sch	Changed USB connector to SMD version	7 年前
voltage_regulator.sch	Added Amphenol 12401610E4#2A	7 年前

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

README.md

PD Buddy Sink