PD Buddy Sink schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Clara Hobbs 7ab375f947 4-layer board with smaller components 7 anni fa
pd-buddy.pretty 4-layer board with smaller components 7 anni fa
.gitignore Initial commit 7 anni fa
LICENSE Added license (CERN OHL 1.2) 7 anni fa
README.md Added a note in the README about board specs 7 anni fa
fp-lib-table Added PD-Buddy v0.1 PCB 7 anni fa
microcontroller.sch 4-layer board with smaller components 7 anni fa
output.sch 4-layer board with smaller components 7 anni fa
pd-buddy-sink-cache.lib 4-layer board with smaller components 7 anni fa
pd-buddy-sink.csv Rename project files to pd-buddy-sink 7 anni fa
pd-buddy-sink.kicad_pcb 4-layer board with smaller components 7 anni fa
pd-buddy-sink.pro Rename project files to pd-buddy-sink 7 anni fa
pd-buddy-sink.sch 4-layer board with smaller components 7 anni fa
pd-buddy.dcm Added Amphenol 12401610E4#2A 7 anni fa
pd-buddy.lib Added Amphenol 12401610E4#2A 7 anni fa
pd_phy.sch 4-layer board with smaller components 7 anni fa
usb_type-c.sch 4-layer board with smaller components 7 anni fa
voltage_regulator.sch 4-layer board with smaller components 7 anni fa

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.