PD Buddy Sink schematics and circuit board

Clara Hobbs 88fcc08878 0.15 mm annular rings Now the board is within spec for MacroFab. Also, the power traces at the USB connector are thicker, so should be able to carry high currents more easily.		преди 7 години
pd-buddy.pretty	4-layer board with smaller components	преди 7 години
.gitignore	Initial commit	преди 7 години
LICENSE	Added license (CERN OHL 1.2)	преди 7 години
README.md	Updated README for v0.3 development	преди 7 години
fp-lib-table	Added PD-Buddy v0.1 PCB	преди 7 години
microcontroller.sch	4-layer board with smaller components	преди 7 години
output.sch	4-layer board with smaller components	преди 7 години
pd-buddy-sink-cache.lib	4-layer board with smaller components	преди 7 години
pd-buddy-sink.csv	Rename project files to pd-buddy-sink	преди 7 години
pd-buddy-sink.kicad_pcb	0.15 mm annular rings	преди 7 години
pd-buddy-sink.pro	Rename project files to pd-buddy-sink	преди 7 години
pd-buddy-sink.sch	4-layer board with smaller components	преди 7 години
pd-buddy.dcm	Added Amphenol 12401610E4#2A	преди 7 години
pd-buddy.lib	Added Amphenol 12401610E4#2A	преди 7 години
pd_phy.sch	4-layer board with smaller components	преди 7 години
usb_type-c.sch	4-layer board with smaller components	преди 7 години
voltage_regulator.sch	4-layer board with smaller components	преди 7 години

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 1 oz copper on all layers. 1.6 mm thickness should be fine. Just keep in mind that it isn’t possible to assemble the board with a soldering iron anymore!

The PCB is made with KiCad, so you’ll need that if you want to make any changes. Several PCB fabricators accept KiCad PCB files directly now, but if you intend to order from one that does not, you’ll need KiCad to plot the Gerbers.

README.md

PD Buddy Sink