PD Buddy Sink schematics and circuit board

Clara Hobbs f8b98d0cfe SOD-323F footprint for D2 and D3 KiCad has the right footprint now, so I don't have to substitute an SOD-323 footprint. The 3D model looks less inaccurate I suppose, but still not right for the particular diodes I'm using.		7 yıl önce
pd-buddy.pretty	Use new USB Type-C schematic symbol	7 yıl önce
.gitignore	Initial commit	7 yıl önce
LICENSE	Added license (CERN OHL 1.2)	7 yıl önce
README.md	Added _KI_LIB_GIT library path	7 yıl önce
fp-lib-table	Added PD-Buddy v0.1 PCB	7 yıl önce
microcontroller.sch	Use new USB Type-C schematic symbol	7 yıl önce
output.sch	4-layer board with smaller components	7 yıl önce
pd-buddy-sink-cache.lib	Use new USB Type-C schematic symbol	7 yıl önce
pd-buddy-sink.csv	Rename project files to pd-buddy-sink	7 yıl önce
pd-buddy-sink.kicad_pcb	SOD-323F footprint for D2 and D3	7 yıl önce
pd-buddy-sink.pro	Added _KI_LIB_GIT library path	7 yıl önce
pd-buddy-sink.sch	4-layer board with smaller components	7 yıl önce
pd-buddy.dcm	Added Amphenol 12401610E4#2A	7 yıl önce
pd-buddy.lib	Use FUSB302BMPX from standard kicad-library	7 yıl önce
pd_phy.sch	SOD-323F footprint for D2 and D3	7 yıl önce
usb_type-c.sch	Use new USB Type-C schematic symbol	7 yıl önce
voltage_regulator.sch	4-layer board with smaller components	7 yıl önce

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 1 oz copper on all layers. 1.6 mm thickness should be fine. Just keep in mind that it isn’t possible to assemble the board with a soldering iron anymore!

The PCB is made with KiCad, so you’ll need that if you want to make any changes. Several PCB fabricators accept KiCad PCB files directly now, but if you intend to order from one that does not, you’ll need KiCad to plot the Gerbers.

KiCad 4 supports loading footprint libraries from Git repositories, but its support for doing the same with symbol libraries is lacking. To address this, I added the variable _KI_LIB_GIT. Set this path in the main KiCad window (Preferences > Configure Paths) to point to a local copy of the kicad-library repository to ensure that you’re using the latest schematic libraries.

README.md

PD Buddy Sink

License