pd-buddy
/
pd-buddy-sink
Наблюдаван 1
Харесван 0
Разклонения 0
Код Задачи 0 Заявки за сливане 0 Версии 4 Уики Activity
PD Buddy Sink schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
30 Ревизии
1 Клон
ИН на ревизия: v0.2
Клонове Маркери
${ item.name }
Create branch ${ searchTerm }
от 'v0.2'
${ noResults }
pd-buddy-sink
Clara Hobbs 9d73a75120 Named BOOT net преди 7 години
pd-buddy.pretty Added pasteless footprints преди 7 години
.gitignore Initial commit преди 7 години
LICENSE Added license (CERN OHL 1.2) преди 7 години
README.md Added a note in the README about board specs преди 7 години
fp-lib-table Added PD-Buddy v0.1 PCB преди 7 години
microcontroller.sch Named BOOT net преди 7 години
output.sch SMD flyback diode, 0.5 mm shorter PCB преди 7 години
pd-buddy-cache.lib Rename board to PD Buddy Sink преди 7 години
pd-buddy.csv Added PD-Buddy v0.1 PCB преди 7 години
pd-buddy.dcm Corrected BJT connections преди 7 години
pd-buddy.kicad_pcb Named BOOT net преди 7 години
pd-buddy.lib Corrected BJT connections преди 7 години
pd-buddy.pro Added PD-Buddy v0.1 PCB преди 7 години
pd-buddy.sch Rename board to PD Buddy Sink преди 7 години
pd_phy.sch Rename board to PD Buddy Sink преди 7 години
usb_type-c.sch Rename board to PD Buddy Sink преди 7 години
voltage_regulator.sch Rename board to PD Buddy Sink преди 7 години

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.