pd-buddy
/
pd-buddy-sink
Vērot 1
Pievienot zvaigznīti 0
Atdalīts 0
Kods Problēmas 0 Izmaiņu pieprasījumi 0 Laidieni 4 Vikivietne Aktivitāte
PD Buddy Sink schematics and circuit board
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.
77 Revīzijas
1 Atzars
Koks: v0.2
Atzari Tagi
${ item.name }
Izveidot atzaru ${ searchTerm }
no 'v0.2'
${ noResults }
pd-buddy-sink
Clara Hobbs 9d73a75120 Named BOOT net 7 gadus atpakaļ
pd-buddy.pretty Added pasteless footprints 7 gadus atpakaļ
.gitignore Initial commit 7 gadus atpakaļ
LICENSE Added license (CERN OHL 1.2) 7 gadus atpakaļ
README.md Added a note in the README about board specs 7 gadus atpakaļ
fp-lib-table Added PD-Buddy v0.1 PCB 7 gadus atpakaļ
microcontroller.sch Named BOOT net 7 gadus atpakaļ
output.sch SMD flyback diode, 0.5 mm shorter PCB 7 gadus atpakaļ
pd-buddy-cache.lib Rename board to PD Buddy Sink 7 gadus atpakaļ
pd-buddy.csv Added PD-Buddy v0.1 PCB 7 gadus atpakaļ
pd-buddy.dcm Corrected BJT connections 7 gadus atpakaļ
pd-buddy.kicad_pcb Named BOOT net 7 gadus atpakaļ
pd-buddy.lib Corrected BJT connections 7 gadus atpakaļ
pd-buddy.pro Added PD-Buddy v0.1 PCB 7 gadus atpakaļ
pd-buddy.sch Rename board to PD Buddy Sink 7 gadus atpakaļ
pd_phy.sch Rename board to PD Buddy Sink 7 gadus atpakaļ
usb_type-c.sch Rename board to PD Buddy Sink 7 gadus atpakaļ
voltage_regulator.sch Rename board to PD Buddy Sink 7 gadus atpakaļ

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.