clara
/
ds1000z-screen-capture
Suivre 1
Favoriser 0
Bifurcation 0
Code Tickets 0 Demandes d'ajout 0 Versions 0 Wiki Activité
Capture the display of a Rigol DS1000Z series oscilloscope by LAN using LXI SCPI commands
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.
12 Révisions
1 Branche
Aborescence: 4115e00996
Branches Tags
${ item.name }
Créer la branche ${ searchTerm }
de '4115e00996'
${ noResults }
ds1000z-screen-capture
RoGeorge 4115e00996 Remove hardcoded numbers il y a 9 ans
DS1104Z_DS1ZA164658712_2015-05-10_23.14.43.png Add capture example il y a 9 ans
DS1104Z_DS1ZA164658712_2015-05-10_23.40.57.png Add capture example il y a 9 ans
LICENSE Initial commit il y a 9 ans
OscScreenGrabLAN.py Remove hardcoded numbers il y a 9 ans
README.md Typo touch il y a 9 ans
telnetlib_receive_all.py Create telnetlib_receive_all.py il y a 9 ans

README.md

DS1054Z_screen_capture

‘OscScreenGrabLAN.py’ is a Python script that captures whatever is displayed on the screen of a Rigol DS1000Z series oscilloscope. To achieve this, SCPI (Standard Commands for Programmable Instruments) are sent from the computer to the oscilloscope, using the LXI (LAN-based eXtensions for Instrumentation) protocol over a Telnet connexion. The computer and the oscilloscope are connected together by a LAN (Local Area Network). No USB (Universal Serial Bus), no VISA (Virtual Instrument Software Architecture), no IVI (Interchangeable Virtual Instrument) and no Rigol drivers are required. Python 2 is required. Python 3 is not supported.

Tested only with Windows 7, Python 2.7.9 and Rigol DS1104Z (a fully upgraded DS1054Z oscilloscope).

Usage:

Install Python 2.7.9 from https://www.python.org/downloads. Install “Python Imaging Library 1.1.7 for Python 2.7” from http://www.pythonware.com/products/pil. Run the PIL (Python Imaging Library) installer as Administrator, otherwise it won’t be installed properly. Connect together the computer and the oscilloscope (by LAN). In order to capture an image from the oscilloscope display and save it to the computer disk, open a Command Prompt as Administrator and run “OscScreenGrabLAN.py”.

Example:

C:\Python27\python.exe OscScreenGrabLAN.py