pd-buddy
/
pd-buddy-dev
Tarkkaile 1
Äänestä 0
Fork 0
Koodi Ongelmat 0 Pull-pyynnöt 0 Julkaisut 0 Wiki Activity
PD Buddy Dev schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
31 Commitit
1 Haara
Puu: 25b55c09fb
Branchit Tagit
${ item.name }
Create branch ${ searchTerm }
from '25b55c09fb'
${ noResults }
pd-buddy-dev
Clara Hobbs 25b55c09fb Post-release version bump 7 vuotta sitten
pd-buddy.pretty Added pasteless footprints 7 vuotta sitten
.gitignore Initial commit 7 vuotta sitten
LICENSE Added license (CERN OHL 1.2) 7 vuotta sitten
README.md Added a note in the README about board specs 7 vuotta sitten
fp-lib-table Added PD-Buddy v0.1 PCB 7 vuotta sitten
microcontroller.sch Post-release version bump 7 vuotta sitten
output.sch Post-release version bump 7 vuotta sitten
pd-buddy-cache.lib Rename board to PD Buddy Sink 7 vuotta sitten
pd-buddy.csv Added PD-Buddy v0.1 PCB 7 vuotta sitten
pd-buddy.dcm Corrected BJT connections 7 vuotta sitten
pd-buddy.kicad_pcb Post-release version bump 7 vuotta sitten
pd-buddy.lib Corrected BJT connections 7 vuotta sitten
pd-buddy.pro Added PD-Buddy v0.1 PCB 7 vuotta sitten
pd-buddy.sch Post-release version bump 7 vuotta sitten
pd_phy.sch Post-release version bump 7 vuotta sitten
usb_type-c.sch Post-release version bump 7 vuotta sitten
voltage_regulator.sch Post-release version bump 7 vuotta sitten

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.