pd-buddy
/
pd-buddy-dev
Seguir 1
Destacar 0
Cuchillo 0
Código Incidencias 0 Peticiones pull 0 Lanzamientos 0 Wiki Actividad
PD Buddy Dev schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
43 Commits
1 Rama
Árbol: ebd7a62d51
Ramas Etiquetas
${ item.name }
Crear rama ${ searchTerm }
desde 'ebd7a62d51'
${ noResults }
pd-buddy-dev
Clara Hobbs ebd7a62d51 Added _KI_LIB_GIT library path hace 7 años
pd-buddy.pretty 4-layer board with smaller components hace 7 años
.gitignore Initial commit hace 7 años
LICENSE Added license (CERN OHL 1.2) hace 7 años
README.md Added _KI_LIB_GIT library path hace 7 años
fp-lib-table Added PD-Buddy v0.1 PCB hace 7 años
microcontroller.sch Changed R10 to 220 Ω hace 7 años
output.sch 4-layer board with smaller components hace 7 años
pd-buddy-sink-cache.lib 4-layer board with smaller components hace 7 años
pd-buddy-sink.csv Rename project files to pd-buddy-sink hace 7 años
pd-buddy-sink.kicad_pcb Changed R10 to 220 Ω hace 7 años
pd-buddy-sink.pro Added _KI_LIB_GIT library path hace 7 años
pd-buddy-sink.sch 4-layer board with smaller components hace 7 años
pd-buddy.dcm Added Amphenol 12401610E4#2A hace 7 años
pd-buddy.lib Added Amphenol 12401610E4#2A hace 7 años
pd_phy.sch 4-layer board with smaller components hace 7 años
usb_type-c.sch 4-layer board with smaller components hace 7 años
voltage_regulator.sch 4-layer board with smaller components hace 7 años

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 1 oz copper on all layers. 1.6 mm thickness should be fine. Just keep in mind that it isn’t possible to assemble the board with a soldering iron anymore!

The PCB is made with KiCad, so you’ll need that if you want to make any changes. Several PCB fabricators accept KiCad PCB files directly now, but if you intend to order from one that does not, you’ll need KiCad to plot the Gerbers.

KiCad 4 supports loading footprint libraries from Git repositories, but its support for doing the same with symbol libraries is lacking. To address this, I added the variable _KI_LIB_GIT. Set this path in the main KiCad window (Preferences > Configure Paths) to point to a local copy of the kicad-library repository to ensure that you’re using the latest schematic libraries.

License

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.