PD Buddy Sink schematics and circuit board

Clara Hobbs 1ea0948e05 Changed long VBUS trace to zone The long VBUS trace connecting the USB connector to the MOSFET was a bit marginal in terms of width, and plenty of room was available for it. Therefore, I decided to change it into a filled zone, which is at least 5 mm wide for most of its length. The resistance will be much lower, and all the vias stitching it to the other VBUS zone under the MOSFET will help carry heat away as well.		преди 7 години
pd-buddy.pretty	Added PD-Buddy v0.1 PCB	преди 7 години
.gitignore	Initial commit	преди 7 години
LICENSE	Added license (CERN OHL 1.2)	преди 7 години
README.md	Changed header in README	преди 7 години
fp-lib-table	Added PD-Buddy v0.1 PCB	преди 7 години
microcontroller.sch	Changed names of user-facing components	преди 7 години
output.sch	Reversed output connector, widened traces	преди 7 години
pd-buddy-cache.lib	Rename board to PD Buddy Sink	преди 7 години
pd-buddy.csv	Added PD-Buddy v0.1 PCB	преди 7 години
pd-buddy.dcm	Corrected BJT connections	преди 7 години
pd-buddy.kicad_pcb	Changed long VBUS trace to zone	преди 7 години
pd-buddy.lib	Corrected BJT connections	преди 7 години
pd-buddy.pro	Added PD-Buddy v0.1 PCB	преди 7 години
pd-buddy.sch	Rename board to PD Buddy Sink	преди 7 години
pd_phy.sch	Rename board to PD Buddy Sink	преди 7 години
usb_type-c.sch	Rename board to PD Buddy Sink	преди 7 години
voltage_regulator.sch	Rename board to PD Buddy Sink	преди 7 години

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

README.md

PD Buddy Sink