PD Buddy Sink schematics and circuit board

Clara Hobbs 1ea0948e05 Changed long VBUS trace to zone The long VBUS trace connecting the USB connector to the MOSFET was a bit marginal in terms of width, and plenty of room was available for it. Therefore, I decided to change it into a filled zone, which is at least 5 mm wide for most of its length. The resistance will be much lower, and all the vias stitching it to the other VBUS zone under the MOSFET will help carry heat away as well.		7 gadus atpakaļ
pd-buddy.pretty	Added PD-Buddy v0.1 PCB	7 gadus atpakaļ
.gitignore	Initial commit	7 gadus atpakaļ
LICENSE	Added license (CERN OHL 1.2)	7 gadus atpakaļ
README.md	Changed header in README	7 gadus atpakaļ
fp-lib-table	Added PD-Buddy v0.1 PCB	7 gadus atpakaļ
microcontroller.sch	Changed names of user-facing components	7 gadus atpakaļ
output.sch	Reversed output connector, widened traces	7 gadus atpakaļ
pd-buddy-cache.lib	Rename board to PD Buddy Sink	7 gadus atpakaļ
pd-buddy.csv	Added PD-Buddy v0.1 PCB	7 gadus atpakaļ
pd-buddy.dcm	Corrected BJT connections	7 gadus atpakaļ
pd-buddy.kicad_pcb	Changed long VBUS trace to zone	7 gadus atpakaļ
pd-buddy.lib	Corrected BJT connections	7 gadus atpakaļ
pd-buddy.pro	Added PD-Buddy v0.1 PCB	7 gadus atpakaļ
pd-buddy.sch	Rename board to PD Buddy Sink	7 gadus atpakaļ
pd_phy.sch	Rename board to PD Buddy Sink	7 gadus atpakaļ
usb_type-c.sch	Rename board to PD Buddy Sink	7 gadus atpakaļ
voltage_regulator.sch	Rename board to PD Buddy Sink	7 gadus atpakaļ

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.