pd-buddy
/
pd-buddy-sink
Volgen 1
Ster 0
Vork 0
Code Kwesties 0 Pull-aanvragen 0 Publicaties 4 Wiki Activiteit
PD Buddy Sink schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
27 Commits
1 Branch
Tree: 23a8743994
Branches Labels
${ item.name }
Maak branch ${ searchTerm }
van '23a8743994'
${ noResults }
pd-buddy-sink
Clara Hobbs 23a8743994 Moved SW1 slider over board 7 jaren geleden
pd-buddy.pretty Added pasteless footprints 7 jaren geleden
.gitignore Initial commit 7 jaren geleden
LICENSE Added license (CERN OHL 1.2) 7 jaren geleden
README.md Added a note in the README about board specs 7 jaren geleden
fp-lib-table Added PD-Buddy v0.1 PCB 7 jaren geleden
microcontroller.sch No paste on P2 or SW1 7 jaren geleden
output.sch SMD flyback diode, 0.5 mm shorter PCB 7 jaren geleden
pd-buddy-cache.lib Rename board to PD Buddy Sink 7 jaren geleden
pd-buddy.csv Added PD-Buddy v0.1 PCB 7 jaren geleden
pd-buddy.dcm Corrected BJT connections 7 jaren geleden
pd-buddy.kicad_pcb Moved SW1 slider over board 7 jaren geleden
pd-buddy.lib Corrected BJT connections 7 jaren geleden
pd-buddy.pro Added PD-Buddy v0.1 PCB 7 jaren geleden
pd-buddy.sch Rename board to PD Buddy Sink 7 jaren geleden
pd_phy.sch Rename board to PD Buddy Sink 7 jaren geleden
usb_type-c.sch Rename board to PD Buddy Sink 7 jaren geleden
voltage_regulator.sch Rename board to PD Buddy Sink 7 jaren geleden

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.