pd-buddy
/
pd-buddy-sink
Tarkkaile 1
Äänestä 0
Fork 0
Koodi Ongelmat 0 Pull-pyynnöt 0 Julkaisut 4 Wiki Activity
PD Buddy Sink schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
25 Commitit
1 Haara
Puu: f243f47abf
Branchit Tagit
${ item.name }
Create branch ${ searchTerm }
from 'f243f47abf'
${ noResults }
pd-buddy-sink
Clara Hobbs f243f47abf Revised high-current traces 7 vuotta sitten
pd-buddy.pretty Added pasteless footprints 7 vuotta sitten
.gitignore Initial commit 7 vuotta sitten
LICENSE Added license (CERN OHL 1.2) 7 vuotta sitten
README.md Added a note in the README about board specs 7 vuotta sitten
fp-lib-table Added PD-Buddy v0.1 PCB 7 vuotta sitten
microcontroller.sch No paste on P2 or SW1 7 vuotta sitten
output.sch SMD flyback diode, 0.5 mm shorter PCB 7 vuotta sitten
pd-buddy-cache.lib Rename board to PD Buddy Sink 7 vuotta sitten
pd-buddy.csv Added PD-Buddy v0.1 PCB 7 vuotta sitten
pd-buddy.dcm Corrected BJT connections 7 vuotta sitten
pd-buddy.kicad_pcb Revised high-current traces 7 vuotta sitten
pd-buddy.lib Corrected BJT connections 7 vuotta sitten
pd-buddy.pro Added PD-Buddy v0.1 PCB 7 vuotta sitten
pd-buddy.sch Rename board to PD Buddy Sink 7 vuotta sitten
pd_phy.sch Rename board to PD Buddy Sink 7 vuotta sitten
usb_type-c.sch Rename board to PD Buddy Sink 7 vuotta sitten
voltage_regulator.sch Rename board to PD Buddy Sink 7 vuotta sitten

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.