You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Clara Hobbs
f243f47abf
Revised high-current traces
|
7 anni fa | |
|---|---|---|
| pd-buddy.pretty | 7 anni fa | |
| .gitignore | 7 anni fa | |
| LICENSE | 7 anni fa | |
| README.md | 7 anni fa | |
| fp-lib-table | 7 anni fa | |
| microcontroller.sch | 7 anni fa | |
| output.sch | 7 anni fa | |
| pd-buddy-cache.lib | 7 anni fa | |
| pd-buddy.csv | 7 anni fa | |
| pd-buddy.dcm | 7 anni fa | |
| pd-buddy.kicad_pcb | 7 anni fa | |
| pd-buddy.lib | 7 anni fa | |
| pd-buddy.pro | 7 anni fa | |
| pd-buddy.sch | 7 anni fa | |
| pd_phy.sch | 7 anni fa | |
| usb_type-c.sch | 7 anni fa | |
| voltage_regulator.sch | 7 anni fa |
README.md
README.md
PD Buddy Sink
This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.
The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.
The PCB is made with KiCad, so you’ll need that if you want to make any changes.
PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.