Firmware for the remote control translator

Clara Hobbs d102f5f00f Improve NEC reading code Now the NEC reading code is more cautious about what it accepts, more readily throwing away input if anything odd is read. It also, and this is the big one, sends an event as soon as it's read all 32 bits, so I can actually read short button presses now(!). I'm not aware of any major reliability problems left, so I'm leaving the translator by the TV for now.		7 yıl önce
ChibiOS @ 3022045071	Added ChibiOS submodule	7 yıl önce
src	Improve NEC reading code	7 yıl önce
.gitignore	Added an LED blinking example	7 yıl önce
.gitmodules	Added ChibiOS submodule	7 yıl önce
LICENSE	Initial commit	7 yıl önce
Makefile	Added an LED blinking example	7 yıl önce
README.md	Added an LED blinking example	7 yıl önce
chconf.h	Send a stream of power off signals to the TV	7 yıl önce
halconf.h	Made a mostly-working remote control translator	7 yıl önce
mcuconf.h	Made a mostly-working remote control translator	7 yıl önce

remote-control-translator-firmware

Firmware for the remote control translator

Flashing

openocd -f interface/stlink-v2.cfg -f target/stm32f1x.cfg -c "adapter_khz 4000; program build/remote-control-translator-firmware.elf verify reset exit"

README.md

remote-control-translator-firmware

Flashing