PD Buddy Dev schematics and circuit board

Clara Hobbs 204f04011b Changed R10 to 220 Ω It'll make the LED a bit brighter, and it's a more common value.		преди 7 години
pd-buddy.pretty	4-layer board with smaller components	преди 7 години
.gitignore	Initial commit	преди 7 години
LICENSE	Added license (CERN OHL 1.2)	преди 7 години
README.md	Updated README for v0.3 development	преди 7 години
fp-lib-table	Added PD-Buddy v0.1 PCB	преди 7 години
microcontroller.sch	Changed R10 to 220 Ω	преди 7 години
output.sch	4-layer board with smaller components	преди 7 години
pd-buddy-sink-cache.lib	4-layer board with smaller components	преди 7 години
pd-buddy-sink.csv	Rename project files to pd-buddy-sink	преди 7 години
pd-buddy-sink.kicad_pcb	Changed R10 to 220 Ω	преди 7 години
pd-buddy-sink.pro	Rename project files to pd-buddy-sink	преди 7 години
pd-buddy-sink.sch	4-layer board with smaller components	преди 7 години
pd-buddy.dcm	Added Amphenol 12401610E4#2A	преди 7 години
pd-buddy.lib	Added Amphenol 12401610E4#2A	преди 7 години
pd_phy.sch	4-layer board with smaller components	преди 7 години
usb_type-c.sch	4-layer board with smaller components	преди 7 години
voltage_regulator.sch	4-layer board with smaller components	преди 7 години

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 1 oz copper on all layers. 1.6 mm thickness should be fine. Just keep in mind that it isn’t possible to assemble the board with a soldering iron anymore!

The PCB is made with KiCad, so you’ll need that if you want to make any changes. Several PCB fabricators accept KiCad PCB files directly now, but if you intend to order from one that does not, you’ll need KiCad to plot the Gerbers.

README.md

PD Buddy Sink