PD Buddy Dev schematics and circuit board

Clara Hobbs 204f04011b Changed R10 to 220 Ω It'll make the LED a bit brighter, and it's a more common value.		7 роки тому
pd-buddy.pretty	4-layer board with smaller components	7 роки тому
.gitignore	Initial commit	7 роки тому
LICENSE	Added license (CERN OHL 1.2)	7 роки тому
README.md	Updated README for v0.3 development	7 роки тому
fp-lib-table	Added PD-Buddy v0.1 PCB	7 роки тому
microcontroller.sch	Changed R10 to 220 Ω	7 роки тому
output.sch	4-layer board with smaller components	7 роки тому
pd-buddy-sink-cache.lib	4-layer board with smaller components	7 роки тому
pd-buddy-sink.csv	Rename project files to pd-buddy-sink	7 роки тому
pd-buddy-sink.kicad_pcb	Changed R10 to 220 Ω	7 роки тому
pd-buddy-sink.pro	Rename project files to pd-buddy-sink	7 роки тому
pd-buddy-sink.sch	4-layer board with smaller components	7 роки тому
pd-buddy.dcm	Added Amphenol 12401610E4#2A	7 роки тому
pd-buddy.lib	Added Amphenol 12401610E4#2A	7 роки тому
pd_phy.sch	4-layer board with smaller components	7 роки тому
usb_type-c.sch	4-layer board with smaller components	7 роки тому
voltage_regulator.sch	4-layer board with smaller components	7 роки тому

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 1 oz copper on all layers. 1.6 mm thickness should be fine. Just keep in mind that it isn’t possible to assemble the board with a soldering iron anymore!

The PCB is made with KiCad, so you’ll need that if you want to make any changes. Several PCB fabricators accept KiCad PCB files directly now, but if you intend to order from one that does not, you’ll need KiCad to plot the Gerbers.

README.md

PD Buddy Sink