PD Buddy Dev schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Clara Hobbs ec5c15d3d3 Moved J1 entirely on board 7 years ago
pd-buddy.pretty Added pasteless footprints 7 years ago
.gitignore Initial commit 7 years ago
LICENSE Added license (CERN OHL 1.2) 7 years ago
README.md Added a note in the README about board specs 7 years ago
fp-lib-table Added PD-Buddy v0.1 PCB 7 years ago
microcontroller.sch No paste on P2 or SW1 7 years ago
output.sch SMD flyback diode, 0.5 mm shorter PCB 7 years ago
pd-buddy-cache.lib Rename board to PD Buddy Sink 7 years ago
pd-buddy.csv Added PD-Buddy v0.1 PCB 7 years ago
pd-buddy.dcm Corrected BJT connections 7 years ago
pd-buddy.kicad_pcb Moved J1 entirely on board 7 years ago
pd-buddy.lib Corrected BJT connections 7 years ago
pd-buddy.pro Added PD-Buddy v0.1 PCB 7 years ago
pd-buddy.sch Rename board to PD Buddy Sink 7 years ago
pd_phy.sch Rename board to PD Buddy Sink 7 years ago
usb_type-c.sch Rename board to PD Buddy Sink 7 years ago
voltage_regulator.sch Rename board to PD Buddy Sink 7 years ago

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.