Clara Hobbs
dac9d5ddff
Add interface for setting voltage range
|
6 лет назад | |
|---|---|---|
| data | 6 лет назад | |
| .gitignore | 7 лет назад | |
| LICENSE | 7 лет назад | |
| README.md | 6 лет назад | |
| pd-buddy-gtk.py | 6 лет назад |
README.md
PD Buddy Configuration
PD Buddy Configuration is a GTK+ GUI for configuring PD Buddy Sink devices.
Dependencies
PD Buddy Configuration is developed with these versions of its dependencies, but older versions may work.
- GTK+ 3.22
- Python 3.6
- python-gobject 3.22
- pd-buddy-python 0.5.0
Usage
Plug your PD Buddy Sink(s) into your computer while holding the Setup button. Start PD Buddy Configuration with:
$ ./pd-buddy-gtk.py
You will be greeted with a list of connected PD Buddy devices. If there is more than one connected, you can identify them by clicking the light bulb button in each list entry (the selected device’s LED will blink rapidly for two seconds).
Click one of the list items to configure the device. Select the desired voltage and current, then click Save. If you want to configure other devices, click the Back arrow to return to the list. After the settings have been saved, the devices can be safely disconnected at any time.