Add interface for setting voltage range
There's a switch to toggle whether the range is enabled at all, two spinbuttons for the range itself which automatically maintain their ordering, and a button to toggle between high and low voltages preferred. What more could a gal ask for?
|пре 3 година|
|data||пре 3 година|
|.gitignore||пре 4 година|
|LICENSE||пре 4 година|
|README.md||пре 3 година|
|pd-buddy-gtk.py||пре 3 година|
PD Buddy Configuration is a GTK+ GUI for configuring PD Buddy Sink devices.
PD Buddy Configuration is developed with these versions of its dependencies, but older versions may work.
Plug your PD Buddy Sink(s) into your computer while holding the Setup button. Start PD Buddy Configuration with:
You will be greeted with a list of connected PD Buddy devices. If there is more than one connected, you can identify them by clicking the light bulb button in each list entry (the selected device’s LED will blink rapidly for two seconds).
Click one of the list items to configure the device. Select the desired voltage and current, then click Save. If you want to configure other devices, click the Back arrow to return to the list. After the settings have been saved, the devices can be safely disconnected at any time.