PD Buddy Sink schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Clara Hobbs e23ebee199 Corrected position of MK2 hace 7 años
pd-buddy.pretty Added pasteless footprints hace 7 años
.gitignore Initial commit hace 7 años
LICENSE Added license (CERN OHL 1.2) hace 7 años
README.md Added a note in the README about board specs hace 7 años
fp-lib-table Added PD-Buddy v0.1 PCB hace 7 años
microcontroller.sch No paste on P2 or SW1 hace 7 años
output.sch SMD flyback diode, 0.5 mm shorter PCB hace 7 años
pd-buddy-cache.lib Rename board to PD Buddy Sink hace 7 años
pd-buddy.csv Added PD-Buddy v0.1 PCB hace 7 años
pd-buddy.dcm Corrected BJT connections hace 7 años
pd-buddy.kicad_pcb Corrected position of MK2 hace 7 años
pd-buddy.lib Corrected BJT connections hace 7 años
pd-buddy.pro Added PD-Buddy v0.1 PCB hace 7 años
pd-buddy.sch Rename board to PD Buddy Sink hace 7 años
pd_phy.sch Rename board to PD Buddy Sink hace 7 años
usb_type-c.sch Rename board to PD Buddy Sink hace 7 años
voltage_regulator.sch Rename board to PD Buddy Sink hace 7 años

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.