PD Buddy Sink schematics and circuit board
選択できるのは25トピックまでです。 トピックは、先頭が英数字で、英数字とダッシュ('-')を使用した35文字以内のものにしてください。
Clara Hobbs e23ebee199 Corrected position of MK2 7年前
pd-buddy.pretty Added pasteless footprints 7年前
.gitignore Initial commit 7年前
LICENSE Added license (CERN OHL 1.2) 7年前
README.md Added a note in the README about board specs 7年前
fp-lib-table Added PD-Buddy v0.1 PCB 7年前
microcontroller.sch No paste on P2 or SW1 7年前
output.sch SMD flyback diode, 0.5 mm shorter PCB 7年前
pd-buddy-cache.lib Rename board to PD Buddy Sink 7年前
pd-buddy.csv Added PD-Buddy v0.1 PCB 7年前
pd-buddy.dcm Corrected BJT connections 7年前
pd-buddy.kicad_pcb Corrected position of MK2 7年前
pd-buddy.lib Corrected BJT connections 7年前
pd-buddy.pro Added PD-Buddy v0.1 PCB 7年前
pd-buddy.sch Rename board to PD Buddy Sink 7年前
pd_phy.sch Rename board to PD Buddy Sink 7年前
usb_type-c.sch Rename board to PD Buddy Sink 7年前
voltage_regulator.sch Rename board to PD Buddy Sink 7年前

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.