PD Buddy Sink schematics and circuit board

Clara Hobbs e23ebee199 Corrected position of MK2 I don't know how that mounting hole got mispositioned, but it was.		7 年前
pd-buddy.pretty	Added pasteless footprints	7 年前
.gitignore	Initial commit	7 年前
LICENSE	Added license (CERN OHL 1.2)	7 年前
README.md	Added a note in the README about board specs	7 年前
fp-lib-table	Added PD-Buddy v0.1 PCB	7 年前
microcontroller.sch	No paste on P2 or SW1	7 年前
output.sch	SMD flyback diode, 0.5 mm shorter PCB	7 年前
pd-buddy-cache.lib	Rename board to PD Buddy Sink	7 年前
pd-buddy.csv	Added PD-Buddy v0.1 PCB	7 年前
pd-buddy.dcm	Corrected BJT connections	7 年前
pd-buddy.kicad_pcb	Corrected position of MK2	7 年前
pd-buddy.lib	Corrected BJT connections	7 年前
pd-buddy.pro	Added PD-Buddy v0.1 PCB	7 年前
pd-buddy.sch	Rename board to PD Buddy Sink	7 年前
pd_phy.sch	Rename board to PD Buddy Sink	7 年前
usb_type-c.sch	Rename board to PD Buddy Sink	7 年前
voltage_regulator.sch	Rename board to PD Buddy Sink	7 年前

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

README.md

PD Buddy Sink