PD Buddy Sink schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Clara Hobbs e23ebee199 Corrected position of MK2 пре 7 година
pd-buddy.pretty Added pasteless footprints пре 7 година
.gitignore Initial commit пре 7 година
LICENSE Added license (CERN OHL 1.2) пре 7 година
README.md Added a note in the README about board specs пре 7 година
fp-lib-table Added PD-Buddy v0.1 PCB пре 7 година
microcontroller.sch No paste on P2 or SW1 пре 7 година
output.sch SMD flyback diode, 0.5 mm shorter PCB пре 7 година
pd-buddy-cache.lib Rename board to PD Buddy Sink пре 7 година
pd-buddy.csv Added PD-Buddy v0.1 PCB пре 7 година
pd-buddy.dcm Corrected BJT connections пре 7 година
pd-buddy.kicad_pcb Corrected position of MK2 пре 7 година
pd-buddy.lib Corrected BJT connections пре 7 година
pd-buddy.pro Added PD-Buddy v0.1 PCB пре 7 година
pd-buddy.sch Rename board to PD Buddy Sink пре 7 година
pd_phy.sch Rename board to PD Buddy Sink пре 7 година
usb_type-c.sch Rename board to PD Buddy Sink пре 7 година
voltage_regulator.sch Rename board to PD Buddy Sink пре 7 година

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.