pd-buddy
/
pd-buddy-sink
Bevaka 1
Stjärnmärk 0
Förgrening 0
Kod Ärenden 0 Pull-förfrågningar 0 Släpp 4 Wiki Aktiviteter
PD Buddy Sink schematics and circuit board
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.
26 Incheckningar
1 Gren
Träd: e23ebee199
Grenar Taggar
${ item.name }
Skapa branchen ${ searchTerm }
från 'e23ebee199'
${ noResults }
pd-buddy-sink
Clara Hobbs e23ebee199 Corrected position of MK2 7 år sedan
pd-buddy.pretty Added pasteless footprints 7 år sedan
.gitignore Initial commit 7 år sedan
LICENSE Added license (CERN OHL 1.2) 7 år sedan
README.md Added a note in the README about board specs 7 år sedan
fp-lib-table Added PD-Buddy v0.1 PCB 7 år sedan
microcontroller.sch No paste on P2 or SW1 7 år sedan
output.sch SMD flyback diode, 0.5 mm shorter PCB 7 år sedan
pd-buddy-cache.lib Rename board to PD Buddy Sink 7 år sedan
pd-buddy.csv Added PD-Buddy v0.1 PCB 7 år sedan
pd-buddy.dcm Corrected BJT connections 7 år sedan
pd-buddy.kicad_pcb Corrected position of MK2 7 år sedan
pd-buddy.lib Corrected BJT connections 7 år sedan
pd-buddy.pro Added PD-Buddy v0.1 PCB 7 år sedan
pd-buddy.sch Rename board to PD Buddy Sink 7 år sedan
pd_phy.sch Rename board to PD Buddy Sink 7 år sedan
usb_type-c.sch Rename board to PD Buddy Sink 7 år sedan
voltage_regulator.sch Rename board to PD Buddy Sink 7 år sedan

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.