PD Buddy Sink schematics and circuit board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Clara Hobbs e23ebee199 Corrected position of MK2 7 年之前
pd-buddy.pretty Added pasteless footprints 7 年之前
.gitignore Initial commit 7 年之前
LICENSE Added license (CERN OHL 1.2) 7 年之前
README.md Added a note in the README about board specs 7 年之前
fp-lib-table Added PD-Buddy v0.1 PCB 7 年之前
microcontroller.sch No paste on P2 or SW1 7 年之前
output.sch SMD flyback diode, 0.5 mm shorter PCB 7 年之前
pd-buddy-cache.lib Rename board to PD Buddy Sink 7 年之前
pd-buddy.csv Added PD-Buddy v0.1 PCB 7 年之前
pd-buddy.dcm Corrected BJT connections 7 年之前
pd-buddy.kicad_pcb Corrected position of MK2 7 年之前
pd-buddy.lib Corrected BJT connections 7 年之前
pd-buddy.pro Added PD-Buddy v0.1 PCB 7 年之前
pd-buddy.sch Rename board to PD Buddy Sink 7 年之前
pd_phy.sch Rename board to PD Buddy Sink 7 年之前
usb_type-c.sch Rename board to PD Buddy Sink 7 年之前
voltage_regulator.sch Rename board to PD Buddy Sink 7 年之前

README.md

PD Buddy Sink

This is the circuit board for the PD Buddy Sink, a device which aims to make USB Power Delivery accessible to any electronics hobbyist.

The board is designed for 2 oz copper. It’s probably best to use a 1.0 or 0.8 mm thick PCB to make sure it’s possible to solder the USB connector’s pins.

The PCB is made with KiCad, so you’ll need that if you want to make any changes.

PD Buddy Sink is Copyright © 2017 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.